John Deere 60HC Mower Deck for X700 Signature Series
X710 Tractor mowing with 60-in. (152-cm) HC mower deck
Side view of mower deck
Deep-deck design of 5.5 in. (140 mm) delivers excellent airflow, so material can be processed quickly and efficiently. Deck is stamped from 9-gauge, 0.150-in. (3.8-mm) steel and has welded-on reinforcement at the bottom edge for extra strength and durability.
60-in. (152-cm) HC mower deck top view
60-in. (152-cm) HC mower deck bottom view
The 60-in. (152-cm) high-capacity deck is formed in a hydraulic press to minimize the number of welds and provide a smooth underside for reduced material buildup:
Wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
Durable plastic deflector spreads grass clippings evenly across the lawn, is hinged, and can be raised to minimize the storage space required.
1-in. (25.4-cm) cold-forged spindles are heat-treated for strength and are supported by ball bearings.
Front edge is raised above the blade plane to allow even cutting of tall grass.
Blade overlap is greater than many conventional decks, for a clean cut.
Mower can side-discharge, mulch (optional), or use a Power Flow™ collection system (optional).
Mower wash port
Mower wash port with hose connector
A wash port is provided to make cleaning the underside of the mower deck easy:
Hose connector is included with the mower deck.
Mulching attachment components (48 HC shown)
An optional mulching attachment is available:
This is a high-performance mulching attachment that includes formed steel baffles to control the material and special mulching blades for superior performance.
The special mulching blades that are included can also be used for side discharging and collecting, though overall performance may be slightly less than with the standard blades.
High capacity (HC) mower decks have ramps positioned on top of the deck for easy installation:
On a four-wheel drive (4WD) tractor, the operator can simply drive onto and over the deck.
On a two-wheel drive (2WD) tractor, the operator must back onto and over the deck.
To remove the mower deck:
Disconnect the drive shaft.
Unlock the draft arm locks.
Back or drive the tractor onto and off the mower deck.
On a 4WD tractor, the operator can simply back onto and off the deck.
On a 2WD tractor, the operator can simply drive forward onto and off the deck.
Optional AutoConnect™ drive (BM23894)
X758 Tractor driving onto high-capacity mower deck with AutoConnect option
AutoConnect option installed on X758 Tractor
AutoConnect drive is an optional kit that will automatically connect or remove the drive from the mower deck to the tractor's mid power take-off (PTO) shaft.
The AutoConnect drive does not need to be removed from the tractor when using front-powered equipment. However, the AutoConnect driveshaft must be disconnected from the tractor's PTO shaft and locked in place to allow the mid-PTO shaft (required for front-powered equipment) to be installed.
Optional Equipment On :
X710, X730, X734, X738, X739, X750, X754, X758
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Refund Policy
Refer to our Terms of Service
You may also like
Recently viewed
Delivery Australia-wide
Or you can Click and Collect from any of our store locations.
Best Price Guarantee
QLD's best price guarantee. We price match major outlets
Service & Support
We service all major makes and models in our service centres
Secure payments
Our store uses industry standard security to protect your information